Multi-GNSS engine for GPS, GLONASS (or BeiDou) and
QZSS; Industrial leading sensitivity of -165 dBm during tracking and -148 dBm during acquisition; Integrated LNA for high sensitivity

LC76F

673 views

  • Multi-GNSS engine for GPS, GLONASS (or BeiDou) and QZSS

  • Industrial leading sensitivity of -165 dBm during tracking and -148 dBm during acquisition

  • Integrated LNA for high sensitivity

  • Supports anti-jamming and multi-tone active interference canceller

  • Supports multiple low-power modes to ensure ultra-low power consumption

  • Supports UART and I2C Interfaces

Features
  • Multi-GNSS engine for GPS, GLONASS (or BeiDou) and QZSS
  • Industrial leading sensitivity of -165 dBm during tracking and -148 dBm during acquisition
  • Integrated LNA for high sensitivity
  • Supports anti-jamming and multi-tone active interference canceller
  • Supports multiple low-power modes to ensure ultra-low power consumption
  • Supports UART and I2C Interfaces
View detail
Region Global
Dimensions (mm) 10.1 × 9.7 × 2.3
Weight (g) Approx. 0.3
Temperature Range  
Operating Temperature -40 °C to +85 °C
Storage Temperature -40 °C to +90 °C
GNSS Features  
Supported Bands GPS L1 C/A: 1575.42 MHz
GLONASS L1: 1601.71 MHz BeiDou B1l: 1561.098 MHz
Default GNSS Constellation GPS + GLONASS
Channel 26 Channels
Horizontal Position Accuracy① Autonomous: < 2 m CEP
Velocity Accuracy ① Without Aid: < 0.1 m/s
Acceleration Accuracy① Without Aid: < 0.1 m/s²
Timing Accuracy① 1PPS < 100 ns
Reacquisition Time < 1 s
TTFF @ -130 dBm with AGNSS② Cold Start: < 6 s
 Warm Start: < 2 s
Hot Start: < 2 s
TTFF @ -130 dBm without AGNSS① Cold Start: < 30 s
Warm Start: < 2 s
Hot Start: < 2 s
 Sensitivity Acquisition: -148 dBm
Tracking: -165 dBm
Reacquisition: -162 dBm
Dynamic Performance① Maximum Altitude: 18000 m
Maximum Velocity: 515 m/s
Maximum Acceleration: 4g
Interfaces  
I2C Interface Up to 400 kbps 
UART Interface Adjustable: 9600–921600 bps
Default: 9600 bps
Update Rate: 1 Hz (Default), up to 10 Hz
Protocol NMEA 0183
External Antenna Interface  
Antenna Type  Active or passive
Antenna Power Supply External power supply, or through the VDD_RF pin
Electrical Characteristics  
Supply Voltage Range 2.8–4.3 V, Typ. 3.3 V
I/O Voltage 2.8 V
Current Consumption (@ 3.3 V) Normal Operation Mode:
28 mA @ Acquisition (GPS + GLONASS)
28 mA @ Tracking (GPS + GLONASS)
Power Saving Modes:
1.4 mA @ Standby Mode
30 μA @ Backup Mode

I. Overview

Quectel LC76F GNSS module supports concurrent reception of GPS, GLONASS (or BeiDou) and QZSS. It can acquire and track any mix of GPS, GLONASS (or BeiDou) and SBAS signals. LC76F is designed to be compatible with Quectel L76 and L76-L as well as L76-LB modules, allowing convenient migration between them.

The integrated LNA provides an improved sensitivity, as well as improved accuracy, fast tracking and acquisition of signals, and can keep enhanced performance under challenged environment. Compared with single GPS system, multiple GNSS systems increase the number of visible satellites, reduce the time to first fix and improve positioning accuracy, even in dense urban canyons.

Combining advanced AGNSS technologies and low-power modes, LC76F achieves high performance, low power consumption and fully meets the industrial standards.

Quectel LC76F’s superior performance makes it ideal for industrial PDA, consumer and industry applications. Extremely low power consumption makes it a great solution for power-sensitive applications, especially portable devices.

Price list

Quantity Unit Price Extended Price
1+ 0
Please enter correct your email
Content is your comment!
Content is too short to!
Comment is too long!
You can not continually write comments!

Related products