- Quectel GNSS L76 module with GPS/Glonass (1575 MHz – 1602 MHz).
- Quectel Quad-band GSM/GPRS M95 module.
- Microcontroller STM32F107VCT6 with ARM 32-bit Cortex-M3 CPU Core, 256KB Flash, 64 Kbytes SRAM, processing speed up to 72MHz.
- 256Mbit external Flash memory .
- GPS/Glonass internal chip antenna.
- GSM antenna.
- Sim card connector.
- Micro USB connector.
- Micro SD card connector.
- 2x10 cable connector.
- 3.5 mm microphone Jack.
- 9 mm Buzzer.
- Indication Led for power , GSM status , GPS status.
- Power input: 9 – 45V with anti-reverse.
- 3.7V li-polimer backup battery.
- Aluminum enclosed box: 60 x 13 x 120 mm.
- Quectel GNSS L76 module with GPS/Glonass (1575 MHz – 1602 MHz).
- Quectel Quad-band GSM/GPRS M95 module.
- Microcontroller STM32F107VCT6 with ARM 32-bit Cortex-M3 CPU Core, 256KB Flash, 64 Kbytes SRAM, processing speed up to 72MHz.
- 256Mbit external Flash memory .
- GPS/Glonass internal chip antenna.
- GSM antenna.
- Sim card connector.
- Micro USB connector.
- Micro SD card connector.
- 2x10 cable connector.
- 3.5 mm microphone Jack.
- 9 mm Buzzer.
- Indication Led for power , GSM status , GPS status.
- Power input: 9 – 45V with anti-reverse.
- 3.7V li-polimer backup battery.
- Aluminum enclosed box: 60 x 13 x 120 mm.
1. Introduction to Open Tracker
The Open Tracker product is a product designed and manufactured by AT-COM that features a navigation device and cruise control. The product is built with the Quectel GNSS L76 module, which supports GPS and Glonas with 33 tracking / 99 acquisition channels for accurate and rapid positioning, with a tolerance of less than 2.5m (airy environment), combined with the Quectel module. GSM / GPRS M95. Board is equipped with STM32F107VCT6 microcontroller with 256KB Flash, 64 Kbytes SRAM, processing speed up to 72MHz.
In addition, the product can be optionally boxed with dimensions of 60 x 13 x 120 mm with monolithic aluminum material with options:
- GSM antenna, GPS / Glonass internal.
- External antenna with SMA connector.
The exterior of the case comes with power and communication wires, a SIM card slot, a microSD card slot, a 3.5mm microphone jack, and LED status indicators for GSM, GPS and Power.
With AT-COM's Open Tracker solution, users can easily apply to the following areas:
- Monitoring and anti-theft for motorcycles.
- Supervise the management of cargo transport, passenger transportation, position tracking, speed, direction of travel.
- Communication, tracking position in the management of cars, especially vehicles such as: Taxi, truck, construction vehicles, bus, passenger car, self-driving car ...
- Apply to the anti-theft system for self-driving rental application, tracking the route of the convoy ...
2. Design diagram of Open Tracker
Users can download the schematic diagram of the Open Tracker (Schematic Open Tracker) product.
3. Features of Open Tracker
OpenTracker feeds are available through the following connectors:
- 5VDC via USB Micro connector.
- 9 - 45VDC through pins VIN, GND.
- Battery Li-Po 3.7V through Connector.
- Or you can connect to external GPS / GLONASS antennas such as: JCA001 (1575.42 ± 1MHz), JCA004 (1575.42 ± 1MHz), JCA002G (1575.42 ± 1MHz 1602-1610MHz) ... via SMA cable.
- The optional GSM Antenna is available as: JCG086 (operating frequency: 824 ~ 960 1710 ~ 2170MHz).
- Or connect to external GSM antenna such as: JCG017 (operating frequency: 824 ~ 960/1710 ~ 2170MHz), JCG821 (operating frequency: 824 ~ 960/1710 ~ 2170MHz) ... via SMA cable.
- Connect the surveillance camera.
- Connect to the speedometer readings of the vehicle.
- Connect the fuel sensor, temperature sensor.
- Connect the meter to Taxi.
- Car lock monitoring, loss of car.
- Monitor the car door open.
4. Dimension of Open Tracker
Quantity | Unit Price | Extended Price |
---|---|---|
1+ | 0 | 0 |